How do I clear the CMOS on the iOne-GX31?
Cause - Possible CMOS corruption. To clear the CMOS on the i-One, first power down the machine and unplug the AC adapter from the wall so no power is supplied to the PC or the AC Adapter. Then locate the CMOS micro switch underneath the front panel, which is located next to the sound ports and is labeled CMOS. Press that switch once to clear the CMOS. Then plug power back into the AC Adapter and turn the PC on. If the CMOS was cleared correctly, shortly after the splash screen two options should present themselves. These options are 'Press F1 to run setup' and 'Press F2 to load default values.' Press F1 to enter the CMOS Setup Utility. Once the CMOS menu appears, choose to 'Load Optimal Defaults' by pressing F9. Once you’ve done that, press F10 to save and exit. The computer will then reboot and load the installed Operating System. For further assistance, please contact Cybernet Tech Support.	Would you like to... Print This Page Email This Page Export to PDF User Opinions No users have rated this article. How would you rate this answer? Helpful Not helpful
Related Articles
How do I clear the CMOS on the i-945? I believe the CMOS battery needs to be replaced, do you sell the battery I need? At What Voltage Would the CMOS Battery Lose System Settings? How do I replace the CMOS Battery in my ZPC? How do I clear the CMOS on the Elite 4? How do I clear the CMOS on the ZPC-9k Series? How do I clear the CMOS on the Elite II? How do I clear the CMOS on the M661S? How do I enter the CMOS/BIOS Setup Utility?
Attachments
No attachments were found.