Knowledge Base

How do I enable POS functionality on the Elite II?

Cause - POS functionality for scanners, keyboard, etc.

1. First remove the keytop to access the motherboard. Locate jumper JP6 directly to the left of the POS & PS/2 ports (jp6.JPG). The CPU heatsink may need to be removed in order to access JP6.

2. Remove the two jumpers from position 1 & 2 and replace them in position 2 & 3 (or from left to right).

3. Now close the computer and connect the desired POS device, being sure to use a POS-Y cable adapter (POSY.jpg). If no device is connected, a POS-Y cable must be plugged into both the POS port and itself in order for the keytop to function properly.

4. If no POS device is in use and/or no POS-Y cable is available, reset the jumpers to their default location.