Knowledge Base

How do I enter the CMOS/BIOS Setup Utility?

To enter the CMOS/BIOS setup utility, power on the unit and begin to repeatedly press the delete key until the CMOS Setup Utility appears.

Related Articles

How do I clear the CMOS on the i-945 and iOne-GX45?

Cause - Possible CMOS corruption 1. To clear the CMOS on the i-945 ...

I believe the CMOS battery needs to be replaced, do you sell the battery I need?

Cause - Possible power outage or just usage over time Cybernet does not ...

At What Voltage Would the CMOS Battery Lose System Settings?

Cause - Possible power outage or just usage over time The CMOS battery ...

How do I replace the CMOS Battery in my ZPC?

Cause - CMOS battery has gone bad 1. When replacing the CMOS battery in ...

How do I clear the CMOS on the Elite 4?

Cause - Unable to bootup the system due to a forgotten password, an ...

Information about Onboard Video Graphics

Cause - Video Memory is allocated Dynamically. The following information ...

Can underlying issues cause CMOS corruption?

Cause - Various CMOS corruption does not typically stem from an underlying ...

How do I clear the CMOS on the ZPC-9k Series?

Cause - Possible Corruption in the BIOS/CMOS 1. To clear the CMOS, power ...

How do I clear the CMOS on the Elite II?

Cause - Unable to boot-up the system due to a forgotten password, an ...

Is it possible to boot from the card reader on the ZPC-9000 or ZPC-9100?

Cause - CMOS boot settings It is possible to boot from the card reader of ...

How do I clear the CMOS on the M661S?

Cause - CMOS Corruption In order to reset the CMOS in the i-One M661S, ...

How do I remove the BIOS password?

Here is how to disable the BIOS password: 1. Make sure the ...

How do I clear the CMOS on the iOne-GX31?

Cause - Possible CMOS corruption 1. To clear the CMOS on the iOne-GX31, ...

How do I clear the CMOS on the ZPC-GX31?

1. Power down the machine and unplug the AC adapter from the wall so no ...