Skip to the main content area Skip to the footer section
(888) 834-4577

Knowledge Base

Products
Search Term
Email to a friend | Print

How do I enter the CMOS/BIOS Setup Utility?

Published: April 8, 2008
Updated: December 10, 2010
To enter the CMOS/BIOS setup utility, power on the unit and begin to repeatedly press the delete key until the CMOS Setup Utility appears.

Related Articles

I believe the CMOS battery needs to be replaced, do you sell the battery I need?

Cause - Possible power outage or just usage over time Cybernet does not s ...

View Article

At What Voltage Would the CMOS Battery Lose System Settings?

Cause - Possible power outage or just usage over time The CMOS battery wi ...

View Article

How do I replace the CMOS Battery in my ZPC?

Cause - CMOS battery has gone bad 1. When replacing the CMOS battery in t ...

View Article

Information about Onboard Video Graphics

Cause - Video Memory is allocated Dynamically.The following information was ...

View Article

Can underlying issues cause CMOS corruption?

Cause - Various CMOS corruption does not typically stem from an underlying ...

View Article

How do I remove the BIOS password?

Here is how to disable the BIOS password: 1. Make sure the comp ...

View Article